Watersnake T24-SW with Universal Cassette Plug- Connected Collar/plug

Description

Here at Strongman Outdoors, we have decided to take the higher road and not resort to cheap sales tactics and such that has been happening with other similar products. We give you the description of our products and the description only, and allow you to make the decision based on your needs!
Our motors are light and compact at
only 20-22 inches total length
and fit through
ALL
pedal drive holes that Hobie and several other kayak brands make,
regardless of the year or model!
This is a watersnake t24 SW (Saltwater rated) trolling motor that has been shortened and fitted with a Hobie cassette plug for the Mirage Drive hole for foot Pedal kayaks. They have
two speeds for both forward and reverse
. It fits through the hole and the head unit sits above the floor of the kayak. This motor has 24 lb of thrust and propels you through the water at up to 5 mph, depending on weight and kayak style! It also has an extendable handle.
This is a very lightweight trolling motor at
only 7 lbs
! The motor drops into the foot pedal hole easily
without any need for maneuvering the plug
to get it in.
The cassette plug will rock back and forth slightly, but is very secure. These plugs are manufactured by Hobie and the hard plastic knobs have never been broken off from underwater contact with the trolling motor, that I have ever been made aware of. These will fit every make and model that has a Mirage drive, except for the inflatable hobies, passport, inflatables and eclipse, but if questioning, please message me to make sure it fits your model. The shaft is not fixed in place in the cassette plug. You have the ability to turn it to make very sharp turns in the water, but can also tighten down the clamp to make it not move while in use.
My motors have had epoxy placed on the top of the cassette plug which attaches the clamp collar to the cassette plug. This allows the motor to be clamped in place and does not move while you are running.
Do bear in mind the size of your pedal drive hole. These motors are small in size and will fit through the hole of your kayak
without having to rotate the cassette plug
. Also, some pedal drive holes are made skinnier than other years.
If a shorter shaft is desired, so that the head unit sits lower in the kayak, message me and I can build one that has a shorter overall shaft. 10.5 inches were taken off of the original size of the shaft.
This is only for shipping in the Continental US. Puerto Rico, Alaska, Hawaii and other US Provinces incur extra delivery fees. Florida residents are charged sales tax as well.
Like us and visit us on Facebook at Strongman Outdoors LLC!