STEALTH TITE RACK

Description

Stealth Tite Rack for 8-9- and 10 ball is a new product designed by a precision machinist and tool maker. And is for people that have a pool table at home and Billiards and Pool hall owners with many tables. After installing the clear or white Reinforcement rings onto your pool table using the supplied polycarbonate precision CNC machined installation template and silicone pull plugs, you will ----
1- Experience racking the balls in the same place every time the balls are racked.
2- Experience braking the balls that are racked tite every time.
3- Experience making balls on the break nearly every time you break.
4- Eliminate your opponent giving you a loose rack or racking above or below the spot or a crooked rack.
5- The rings are only .002 thousandths of an inch thick, A human hair is .003 to .004 thousandths thick. So they will not
interfere with the normal rolling of the balls over them when playing a game.
6- The template is precision CNC machined and designed to locate the .25 Diameter holes in the rings to better than
.005 true position of each other. The location of the holes in the template was determined by trial and error by making
many prototype templates, and the template you are buying will give you the tightest rack possible.
This Stealth Tite Rack template and silicone pull plugs will last a life time, and comes with a 200 pack of Avery 5721 clear Reinforcement labels. The labels can be purchased on eBay and elsewhere for about 1.5 cents for each ring and only 14 rings are needed per table, so the cost to replace the rings on each table is only .21 cents. and will last for many months of braking the balls without needing to be reinstalled, If the balls are not racking as tite as when first installed simply use a table brush to clean the chock dust and dirt out of the ring holes and the balls will rack as tite as first installed.