Roll Up Door JANUS Model 650 sizes 3x7 to 10x10 available

Description

Roll Up Doors Direct Model 650
Our most durable, quick to install and easy of  maintain Door
Superior product + Recognized value
Sizes from 3 ft-10 ft Wide and 7 ft -10 ft high
Doors come complete with all hardware, guide rails, mounting brackets, tensioner, lock/latch and mounting components for masonry/wood or steel.
The prices shown are for the door without shipping, door can be collected from our distribution centers free of shipping.
Doors are shipped via LTL truck and are quoted depending on size and zip code.
The Roll Up Doors Direct International Corporation
Model 650 Mini Storage Door
is designed and manufactured  with durability, quick installation, ease of maintenance in mind. Standard  features such as ratchet tensioner, enclosed barrel housing a dead axle  assembly, and a factory installed stainless steel latch eliminate the need  for upgrades and additional charges
A team of experienced door experts is available to  assist you with any of your door needs.
**Please note that all of our doors are made to   your opening size - If you font find the size you need please contact via Ask a Question today:
The
Model 650 Mini Storage Door
is  designed and manufactured with
durability, quick installation and ease of maintenance in mind.   Features standard to this door eliminate the need for extra options or  upgrades.  Time is money so you save money since we ship your self  storage door with the latch, brackets and tensioner already in place.   With our Roll Up Door, you simply snap the brackets into the guides and the  door is ready to stand.
Features of the Model 650 Mini Storage Door
Door  Springs
- During production, each spring is coated with a generous  amount of grease that penetrates the innermost pores of the spring with  additives, displacing moisture and preventing the formation of rust and  corrosion.  In addition, this process relieves the friction created  between spring coils, thereby providing smoother door operation.   Finally, the spring and axle assembly is enclosed in a tube to protect them  from the elements encountered throughout the life of the door.
Package  Protection and Shipping
- Doors stacked on top of each other in  transit are going to shift...unless they can be packaged in a way to  minimize the sliding that occurs during that time.  Roll Up Doors  Direct has found a solution.  Each door is suspended individually in  the crates.  Whether they travel down the block or across the country,  compaction damages, door abrasions and chatter marks are virtually  eliminated.
Ratchet  Tensioning Device
- The Roll Up Doors Direct ratchet tensioning  device, supplied as standard equipment on our door, offers a simpler method  of tensioning while more accurately fine tuning all the springs on the door  at the same time.  There is no extra hardware required.  Eight  different positions on the tension wheel allow one to perfectly balance the  door every time.  There are no pins required to hold the tension on the  spring...you simply just click it.
Radial Ball Bearing
s - Roll Up Door supplies radial  ball bearings at no additional cost to you.  Our permanently lubricated  bearings require no maintenance and are guaranteed to last the entire life  span of the door.
Door Stops
- Our removable door  stops are simple to install and prevent the curtain from over traveling the  guide when raising the door.
Head  Axle and Torque Tube Assembly
- This design, noted for its  durability and smoother
operation with commercial applications, has now been incorporated into the  Roll Up Door self storage door.  The tube housing protects the springs  and strengthens the axle.  Eliminating axle push and shift that can  occur with a live axle, the dead axle design allows for a straighter travel  path of the door curtain in the guides.  The greatest feature of this  design is that it affords the fine tuning of any spring adjustment to  equally affect all springs on the door at the same time.
Magnetic  Stainless Steel Latch
- Our new patented mini latch features a  cover plate made from a heavy gauge of stainless steel.  In addition,  the latch cover protects the slide from tampering by completely covering the  slide with the exception of a tab used to operate the latch.  To  further secure the door, the latch's two-inch throw with its magnetic  properties can be incorporated with the new guide-mounted security devices.   This versatile design affords the ability for you to utilize padlocks,  cylinder licks or both.
More Features
All
Drums
are fitted with a grease filled, shielded  radial ball bearing to contribute to a smoother operation and reduce  wear and friction.
Factory installed galvanized reinforced 12 gauge
Brackets
are  designed to easily snap onto the guides, reducing installation time.
Galvanized, guide-mounted
Head Stops
are simple to  install and prevent curtain over travel when raising the door.   Installed through the guide after curtain is lowered, they provide  definite contact with the bottom bar angle and stop clips.
The
Ratchet Tensioning
Assembly is factory  installed on the end of the door axle and allows precise fine tuning  of the initial spring tension.  Increments of 1/8 turn are  possible.  Tensioner adjusts both springs equally at the same time  from only one end of the door.
Roll formed clear acrylic coated galvanized steel
Bottom Bar
reinforced  with a 2" x 1-1/2", 11 gauge full width galvanized angle that  extends fully into the guides.  The PVC bulb astragal provides  positive contact with floor.  Lift handle(s) and stop clips  installed on exterior side of bottom bar and a non-rotting pull rope  is attached to the inside angle.
Oil tempered helical torsion
Springs
are factory  lubricated to minimize friction and corrosion while increasing the  spring cycle life.  Spring wire conforms to ASTM A 229.
Full width galvanized steel
Barrel
totally encloses  the drums, springs and axle.  Barrel-type construction reduces door  sag, eliminates drum dents and improves operation due to an even  support of the curtain for the entire width.
Galvanized and pre-painted with long lasting silicone polyester  paint, the 26 gauge
Corrugated Curtain
is roll  formed from ASTM A 653 grade 80 full hard steel.  This premium steel  yields greater door strength and minimized curtain damage.  Full  height felt tape on back of curtain prevents nesting and reduces  paint rubbing.  20 colors are standard with others available on  special order.
Roll formed 18 gauge galvanized
guides
are fitted  with dual polyethylene wear strips to reduce friction and muffle  door noises.  All guide attachment to jamb is performed through the  guides without the addition of clips welded to the back of the  guide.  This gives a neater appearance, increased strength and aids  in tight installations.
Standard stainless steel cover, slide and four attachment bolts are  factory installed.  The slide exhibits magnetic properties that can  be used to activate a guide mounted security sensor.
Latch
accepts  all industry padlocks, including 7/16" diameter shanks.  Provision  for cylinder lock included.
Please Note:  All doors under 10' wide and 10'  tall are manual lift, pull rope lowered.  Commercial doors more than  10' wide or 10' tall come with a standard reduced drive chain hoist.
ALL DOORS ARE CUSTOM MADE AND CANNOT BE RETURNED. WE WILL CONTACT YOU TO CONFIRM ALL THE DOOR DETAILS BEFORE WE START TO
MANUFACTURE
. IF WE CANNOT CONFIRM THE DOOR DETAILS IT WILL DELAY THE PRODUCTION OF THE DOOR. ALL ROLL UP DOORS COME WITH ALL THE TRACK, SPRINGS, LATCH/LOCK AND HARDWARE. PLEASE SEE ITEM DETAILS FOR ADDITIONAL INFORMATION
. ALL ROLL UP DOORS ARE SHIPPED VIA LTL AND REQUIRE THE CUSTOMER TO HAVE THE
ABILITY
TO OFF LOAD THE DOOR FROM A SEMI/TRACTOR TRAILER.
DOOR SIZES ARE MEASURED (WIDTH X HEIGHT) AND ARE THE FINISHED FRAME DIMENSIONS.
PLEASE CHECK YOUR FINISHED FRAME W AND H PLUS THE SIDE AND HEAD ROOM
CLEARANCES
FOR THE SIZE OF DOOR ORDERED.
THE DOOR SIZE DETERMINES THE OPTIONS THAT ARE SUPPLIED AS STANDARD.
SMALLER ROLL UP DOORS COME WITH EXTENSION SPRINGS AND LARGER SIZES COME WITH SPRINGS AND CHAIN HOIST.
ROLL UP DOORS ABOVE 10 X 10 COME WITH A CHAIN HOIST AS STANDARD.
MODELS LISTED ARE STANDARD DOORS WITH NO EXTRAS (WINDOWS, DECORATIVE HARDWARE ETC.)
PICTURES SHOW EXTRA ITEMS ARE FOR INFORMATIONAL PURPOSES ONLY.