Roll Up Door JANUS Model 2000 sizes 8x8 to 12x16 available

Description

Roll Up Doors Direct Model 2000
The most traditional rolling sheet door in the industry.
Time-honored, established, dependable and sturdy
The model 2000 is the traditional rolling sheet door. Time-honored and  established, it is dependable and sturdy. Used in a variety of field  applications, it provides an economical alternative to sectional or slat  doors. Installation is quick and the cam action device allows for easy  adjustment of the springs simultaneously. Backed by a one year warranty,  it’s a solid investment for commercial door usage
The Model 2000 Standard Commercial Sheet Door offers special features for  commercial installations. Model 2000 has the deepest guide engagement in the  industry and universal fastening guides. With the Model 2000's durability  and low maintenance, this door is sure to have an unequaled quality and  value. This is not a Wind Load door.
Up to 8'0"
8'1" to 9'0"
9'1" to 10'0"
10'1" to 12'0"
12'1" to 14'0"
14'1" to 16'0"
Up to 8'0"
5
6
8
0
7
8
8'1" to 9'0"
5
6
3
3
0
11
9'1" to 10'0"
6
5
8
8
9
74
10'1" to 12'0"
0
2
5
6
90
11
**Please note that all of our doors are made to your opening size - If  you don't find the size you need please
use eBay's Ask a  Question feature.
Roll up door model 2000 Features
The  26 gauge corrugated door curtain is manufactured from full hard  galvanized grade 80 steel and coated with Super Durable polyester paint  that is backed by a 40 year film integrity and 25 year no-fade limited  paint warranty. Available in sizes up to 12’0” x 18’0” and in over 20  different standard colors.
Tough,  durable, wide, heavy duty nylon stripping controls curtain stretch and  works in conjunction with the vinyl guide strip to
reduce  wear and deaden sound.
The  slide bolt lock assembly affixed to the bottom bar at each end of the  door curtain fastens through the guide to securely keep the door locked  and in the down position. Padlocks can be attached to the slide to  further secure the door.
The  flat door stop slide makes
installation  quicker
. Simply slide through the holder on the guide and affix  with a fastener
12”  diameter drums allow for lower headroom requirements. An enclosed barrel  houses the dead axle assembly and protects the factory lubricated  springs from direct contact with environmental elements. The inherent  strength provided by the spiral barrel minimizes axle deflection  providing smoother operation. Because the curtain is attached by screws  and not seamed to the barrel, replacement of either independent assembly  is cost-effective, quick and easy.
Grease-filled,  shielded radial ball bearings at the drums provide longevity and smooth  operation. Factory installed insert nuts help make the installation of  the chain hoist and operator sprocket easier.
A  cam-action spring tension holding device allows quick, easy and equal  adjustment of the tension on all springs simultaneously from one end of  the door. The cam tensioner bites into the axle helping to eliminate the  unwanted spinning of the axle during the initial spring loading or  adjustment process.
A  reduced drive chain hoist allows for smoother operation on doors over  10’0” wide or 10’0” tall.
Mounting  brackets are engineered and designed with deep embossing for strength,  and are independently tested to withstand more than 2,700 pounds per  pair. The installation-friendly mounting brackets feature safe rounded  edges and slots that allow for easy vertical adjustments as well as  various installation preferences.
Convenient  spring tension adjustment is accommodated by inserting a common 1/2”  ratchet tool into the end of the drive shaft and rotating. Initial  loading of the door tension can be easily accomplished with a ratchet  without the difficulty of spinning the door. This innovation also allows  the tension to be easily measured and managed with a torque wrench.
Door Options
Magnetic  Stainless Steel Latch
- Our new patented mini latch features a  cover plate made from a heavy gauge of stainless steel.  In  addition, the latch cover protects the slide from tampering by  completely covering the slide with the exception of a tab used to  operate the latch.  To further secure the door, the latch's  two-inch throw with its magnetic properties can be incorporated with the  new guide-mounted security devices.  This versatile design affords  the ability for you to utilize padlocks, cylinder licks or both.
Top  Draft Stop
- 2 1/4" Black "L" shaped neoprene weather stripping  affixes directly to the door curtain where the curtain meets the header  and provides a barrier to weather elements. Rolls up in the roll when  the door is in the up position.
Hood
-  Recommended for exterior mount applications or for cosmetic appearance.  If the door is being mounted on the outside of the building (where the  drum is exposed to the weather elements) they will need a hood (or  protective over-hang) because the drum of the door is not weather-proof  and could be damaged by rain, snow, etc. Insulated doors can NOT be  mounted on the outside of the building or have a reverse curtain.
Side  Brush Seal
- 2” Polypropylene Side Brush Seal with Aluminum  Retainer mounts on the side your frame work. The flexibility of the  brush allows complete seal of the roll up door corrugation. Keeping out  dust, air flow, pesky insect and rodents.
The  Pantheon range of low voltage DC operators are designed to fit enclosed  internally in the barrel of the rolling door, providing quiet and  efficient operation but requiring only minimal side room. The logic  controller is designed to be readily compatible with external  transmitters, receivers, photo eyes and sensing edges. The operator is  always fitted to the right side.
Insulation  is made of a foil-backed, dual-layer polyethylene air-bubble insulation  secured in place with a strong adhesive and joined by mylar film to  provide an R value of 4 (top draft stop and side draft stops are also  included). Model 1000I only.
Vision  panels provide outside visibility
and  allow light entry through the 5” x 17” panel. Constructed of a  translucent polycarbonate panel inside a glossy white 20 gauge frame,  the panels create no interference with the operation of the door. The  location and number of vision panels are limited by the door size. Ask a  sales representative for details.
Guide Details
Universal mount 4” deep 16 gauge galvanized steel guides require no  pre-installation modifications for wood, steel, concrete or masonry  block applications.
Model Information Brochures
Model 2000 Brochure
Model 2000 Installation
Technical Drawing
ALL DOORS ARE CUSTOM MADE AND CANNOT BE RETURNED. WE WILL CONTACT YOU TO CONFIRM ALL THE DOOR DETAILS BEFORE WE START TO
MANUFACTURE
. IF WE CANNOT CONFIRM THE DOOR DETAILS IT WILL DELAY THE PRODUCTION OF THE DOOR. ALL ROLL UP DOORS COME WITH ALL THE TRACK, SPRINGS, LATCH/LOCK AND HARDWARE. PLEASE SEE ITEM DETAILS FOR ADDITIONAL INFORMATION. ALL ROLL UP DOORS ARE SHIPPED VIA LTL AND REQUIRE THE CUSTOMER TO HAVE THE
ABILITY
TO OFF LOAD THE DOOR FROM A SEMI/TRACTOR TRAILER.
DOOR SIZES ARE MEASURED (WIDTH X HEIGHT) AND ARE THE FINISHED FRAME DIMENSIONS.
PLEASE CHECK YOUR FINISHED FRAME W AND H PLUS THE SIDE AND HEAD ROOM
CLEARANCES
FOR THE SIZE OF DOOR ORDERED.
THE DOOR SIZE DETERMINES THE OPTIONS THAT ARE SUPPLIED AS STANDARD.
SMALLER ROLL UP DOORS COME WITH EXTENSION SPRINGS AND LARGER SIZES COME WITH SPRINGS AND CHAIN HOIST.
ROLL UP DOORS ABOVE 10 X 10 COME WITH A CHAIN HOIST AS STANDARD.
MODELS LISTED ARE STANDARD DOORS WITH NO EXTRAS (WINDOWS, DECORATIVE HARDWARE ETC.)
PICTURES SHOW EXTRA ITEMS ARE FOR INFORMATIONAL PURPOSES ONLY.